Eparency Polyaspartic Coating Resin Satin Finish Low Viscosity Fast Set
Product Name: Two Parts 1:1 Hard Satin Low Viscosity Polyaspartic Resin
Brand: Eparency
Viscosity: 80-150 cps
Colour: Clear; no colour
Shore D: 90 (Hard)
Mixing Ratio: 1:1 by weight or volume
Potlife: 20 minutes
Appearance: Water clear liquid
Curing Time: 1-2hrs depending on ambient temperature and room humidity.
This polyaspartic coating contains solvent, which is fast vaporized. No solvent residue in the finished coating. Coating has satin to matte finish. Coating is rock hard, scratch and heat resistant.
Simple Instruction:
Do the mixing and coating in a well ventilated place. Wear protective equipment. No fire or smoking during the whole process.
Mix A and B with 1:1 ratio by weight till smooth. Donot mix for too long. Mixture could turn thick after a few minutes. Coating need to be done within the potlife. Its better for the coating to be done as soon as possible after mixing. A thick mixture could trap bubble. Coating thickness shall be within 1 millimetre. Thick coating might trap bubble. Coating thickness shall be even lower for vertical surface. Thick coat on vertical surface could slump and cause surface unevenness.
It will take a few hours for the coating to cure. During the curing process, do not touch or move the object to avoid surface distortion.